info 网络连接: 名称=本地连接,设备=Realtek RTL8139/810x Family Fast Ethernet NIC,介质类型=LAN,子介质类型=LAN
info 网络连接: 名称=Vnet_PPPoE,设备=WAN 微型端口 (PPPOE),介质类型=PPPoE,子介质类型=无
info 网络连接: 名称=宽带连接,设备=WAN 微型端口 (PPPOE),介质类型=PPPoE,子介质类型=无
info 网络连接: 名称=DG_PPPoE,设备=WAN 微型端口 (PPPOE),介质类型=PPPoE,子介质类型=无
info 已选择以太网连接
网络适配器状态
warn HTTP: 连接 www.microsoft.com 时出现错误 12007: The server name or address could not be resolved
warn HTTPS: 连接 www.microsoft.com 时出现错误 12007: The server name or address could not be resolved
warn FTP (被动): 连接 ftp.microsoft.com 时出现错误 12007: The server name or address could not be resolved
warn HTTPS: 连接 www.passport.net 时出现错误 12007: The server name or address could not be resolved
warn FTP (主动): 连接 ftp.microsoft.com 时出现错误 12007: The server name or address could not be resolved
warn HTTP: 连接 www.hotmail.com 时出现错误 12007: The server name or address could not be resolved
error 无法建立 HTTP 连接。
error 无法建立 HTTPS 连接。
error 无法建立 FTP 连接。作者: cnangel 时间: 2009-5-3 18:41
是这个吗 我不懂请站长耐心帮忙啊!
----------------------------------------------------------------------------------
今天看了一下 有两个文件 HOSTS 还有一个是 IMHOSTS
都不是只读文件
HOSTS文件 :127.0.0.1 localhost
----------------------------------------------------------------------
IMHOSTS文件:# Copyright (c) 1993-1999 Microsoft Corp.
#
# This is a sample LMHOSTS file used by the Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to computernames
# (NetBIOS) names. Each entry should be kept on an individual line.
# The IP address should be placed in the first column followed by the
# corresponding computername. The address and the computername
# should be separated by at least one space or tab. The "#" character
# is generally used to denote the start of a comment (see the exceptions
# below).
#
# This file is compatible with Microsoft LAN Manager 2.x TCP/IP lmhosts
# files and offers the following extensions:
#
# #PRE
# #DOM:<domain>
# #INCLUDE <filename>
# #BEGIN_ALTERNATE
# #END_ALTERNATE
# \0xnn (non-printing character support)
#
# Following any entry in the file with the characters "#PRE" will cause
# the entry to be preloaded into the name cache. By default, entries are
# not preloaded, but are parsed only after dynamic name resolution fails.
#
# Following an entry with the "#DOM:<domain>" tag will associate the
# entry with the domain specified by <domain>. This affects how the
# browser and logon services behave in TCP/IP environments. To preload
# the host name associated with #DOM entry, it is necessary to also add a
# #PRE to the line. The <domain> is always preloaded although it will not
# be shown when the name cache is viewed.
#
# Specifying "#INCLUDE <filename>" will force the RFC NetBIOS (NBT)
# software to seek the specified <filename> and parse it as if it were
# local. <filename> is generally a UNC-based name, allowing a
# centralized lmhosts file to be maintained on a server.
# It is ALWAYS necessary to provide a mapping for the IP address of the
# server prior to the #INCLUDE. This mapping must use the #PRE directive.
# In addtion the share "public" in the example below must be in the
# LanManServer list of "NullSessionShares" in order for client machines to
# be able to read the lmhosts file successfully. This key is under
# \machine\system\currentcontrolset\services\lanmanserver\parameters\nullsessionshares
# in the registry. Simply add "public" to the list found there.
#
# The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE
# statements to be grouped together. Any single successful include
# will cause the group to succeed.
#
# Finally, non-printing characters can be embedded in mappings by
# first surrounding the NetBIOS name in quotations, then using the
# \0xnn notation to specify a hex value for a non-printing character.
#
# The following example illustrates all of these extensions:
#
# 102.54.94.97 rhino #PRE #DOM:networking #net group's DC
# 102.54.94.102 "appname \0x14" #special app server
# 102.54.94.123 popular #PRE #source server
# 102.54.94.117 localsrv #PRE #needed for the include
#
# #BEGIN_ALTERNATE
# #INCLUDE \\localsrv\public\lmhosts
# #INCLUDE \\rhino\public\lmhosts
# #END_ALTERNATE
#
# In the above example, the "appname" server contains a special
# character in its name, the "popular" and "localsrv" server names are
# preloaded, and the "rhino" server name is specified so it can be used
# to later #INCLUDE a centrally maintained lmhosts file if the "localsrv"
# system is unavailable.
#
# Note that the whole file is parsed including comments on each lookup,
# so keeping the number of comments to a minimum will improve performance.
# Therefore it is not advisable to simply add lmhosts file entries onto the
# end of this file.作者: petoto 时间: 2010-8-17 15:53